View all the latest Blog posts about chemical products and advancements in technology for the Industry.
Read the latest News and views from Chemex Industries.
by Barry Greenberg January 30, 2021 1 min read
Keep safe, avoid fires and eruptions, in your production areas. Use a safety solvent for best practices.
Industrial, institutional & municipal organizations utilize electric motors, generators, bearings, water meters and much more, in the typical facility. Its highly recommended to maintain this equipment, as part of your maintenance protocol.
Using a solvent cleaner is the only method to remove petroleum oils, tar and wax from these surfaces. The majority of these solvents are considered safe on all metals and insulation. Using products in the naphtha, kerosene or diesel family have typically been in use for these operations. The major problem, of course is that they are highly flammable as well as other pose other environmental and health concerns.
The product of choice is a non-flammable, non-conductive degreaser high purity solvent. This product allows the maintenance engineer the ability to clean the equipment, while in operation. There is NO flashpoint. Additionally, it dries quickly with no residue.
Our product contains no soaps, no synthetics, no fillers, no alkalis or acids.
Please view our Technical Report for additional data and the many applications for KWIK DRI, Non-Flammable Safety Solvent.
Once again, it's non-conductive - 29,000 volt dielectric and non-flammable. It dries quickly and leaves no residue. Can be used on electric motors, generators or other electrical equipment while they are operating. It's safe on all metals. Aluminum, brass and copper-plated parts are not adversely affected.
KWIK DRI Is VOC compliant in ALL states.
by Barry Greenberg July 09, 2021 2 min readRead More
by Barry Greenberg July 08, 2021 2 min readRead More
by Barry Greenberg April 27, 2021 2 min readRead More